Melbourne bike keys, locks and ignitions
A motorcycle locksmith who drives to your bike anywhere across metropolitan Melbourne, for spare keys, lost keys, chip keys and stubborn ignitions.
Give us the make, model and year, plus where the bike is parked, and we will call you back to plan the job.
When a motorcycle locksmith is what you need, the bike is usually stuck somewhere awkward: a work car park, a kerb outside a café, a garage with the only key gone missing.
We bring the key machines, decoders and programming tools to the bike, so there is no trailer to hire and no wait for a dealer to order a blank from overseas.
Riders call us as a motorbike locksmith for everything from a scooter key worn smooth after years in the ignition to a late-model sportsbike with a factory immobiliser.
We cut the blade, match it to the ignition, seat and fuel-cap locks, then program the transponder where the bike uses one, and we test every key in every lock before we pack up.
✓
We come to the bike
✓
Most makes and scooters
✓
Ownership checked first


No spare, no original and no key number? That is a normal job for us. Most bikes have a seat, helmet or fuel-cap lock that shares the same cuts as the ignition, so we decode one of those to work out the key, cut it to code and fine-tune it in the ignition barrel.
On bikes where the secondary locks do not give the full key, we read the ignition itself. The aim is always to avoid pulling the bike apart, because the ignition on most motorcycles sits deep in the top yoke and takes real work to remove.
■
Cuts read from the seat, helmet holder or fuel cap
■
Blades cut to code on site
■
Spares cut while we are there so it never happens twice
Since the mid-2000s many larger bikes have shipped with an immobiliser that only lets the engine start when it recognises the chip in the key head.
A cut key on its own will turn the ignition but the bike will not run, which catches out plenty of riders who buy a second-hand bike with a single key.
We program new transponder keys to the bike and, where the key registry lives in the ECU, read and rewrite it so a lost or stolen key stops working. Honda HISS, Kawasaki KISS and Ducati red-key systems are all familiar territory.


Worn ignitions, seized fuel caps and seat locks full of road grit are common on bikes that live outdoors near the bay.
We loosen and service locks where that is the sensible fix, and replace the ignition barrel when it is beyond saving, keying the new parts to the key you already carry where the design allows.
If a key has snapped off in the ignition, leave it there and call 0410 380 354. Picking at it with pliers usually pushes the broken piece further in and turns a careful extraction into a barrel replacement.

01
Tell us the bike's make, model and year, where it is parked and whether any working key still exists.
02
Registration papers or a similar document plus photo ID are confirmed before any key is cut or programmed, which protects you as much as us.
03
At the bike we decode the lock, cut the blade and, if the bike has an immobiliser, pair the new chip with it.
04
Ignition, seat, helmet holder, fuel cap and steering lock are all tried with the new key before we finish.
Motorcycle and scooter locks are fiddly, with extra wafers in the ignition and keys that share cuts across several locks. Concentrating on bikes means the right blanks and decoders are already in the van.
A dealer replacement can mean a trailer, a booking and a wait for parts. We do the cutting and programming where the bike is parked, whether that is a driveway in Cheltenham or a basement in South Yarra.
We explain what your particular bike needs, what can be done on site and what cannot, so there are no surprises once the tools come out.


Spare and duplicate bike keys →
Copies of your working key, or a new blade cut to code so you are never down to a single key again.
Replacing lost or stolen keys →
New keys made from the bike's own locks when every original has gone, including bikes bought at auction.
Transponder and immobiliser keys →
Chip keys paired to bikes with factory immobilisers, and old keys removed from the bike's memory.
Worn or damaged ignition barrels →
Ignition switches repaired or replaced, with the new barrel matched to your key wherever the design allows.
Seat, fuel-cap and steering locks →
Opening seized or locked bike locks without damaging the bodywork, then getting them working smoothly again.
Snapped keys pulled from locks →
Broken key pieces drawn out of ignitions and seat locks with proper extractors, followed by a fresh key.
We are a mobile service based in Melbourne. These are the suburbs we cover most often; if you are nearby but not listed, call and ask.

No. We come to wherever the motorcycle is parked within our Melbourne service area and do the cutting and programming there, as long as there is safe room to work around the bike.
Proof that the bike is yours, such as the registration papers, plus photo ID. If you have any key at all, even a broken one, keep it for us to look at.
Yes. Vespa, Piaggio and most other scooters use similar keys and locks, and many newer ones have chips that need programming just like a larger motorcycle.

Ring 0410 380 354 or send the form with your bike details and location, and we will call back to arrange a time.